器件名称:
CS19202CBI30
功能描述:
STS-192 SONET/SDH FRAMER AND POS/ATM MAPPER
文件大小:
42.7KB 共2页
简 介:
Part Number - S19202CBI30 Product Brief Revision 3.1 - January 2002 GANGES Features Supports full duplex mapping of ATM cells or packets for a single STS-192c/AU-4-64c, four STS-48c/AU-4-16c or sixteen STS-12c/AU-4-4c SONET/SDH payloads. Supports a single STS-192/STM-64 or quad STS-48/STM16 line interfaces on the line side and on the protection port. Each STS-48/STM-16 can support a concatenated payload or can be channelized down to STS-12c/AU-4-4c. Terminates and generates SONET/SDH section, line, & path layers on the line side and APS port, with transport/ section E1, E2, F1 and DCC overhead interfaces in both transmit and receive directions. Supports independent loop timing when in quad STS-48/ STM-16 mode. Supports protection switching (APS) between two Ganges devices or between two fiber optics modules Provides an Optical Internetworking Forum (OIF) SFI-4 compliant 622.08 MHz, 16-bit bus LVDS interface on the line side in both the TX and RX directions. Provides a 64-bit, 200 MHz FlexBus 4 system interface that supports the transfer of either packets or ATM cells. Support mixed ATM and POS data termination, configurable on a per-tributary basis 16-bit synchronous microprocessor interface for configuration, control, and status monitoring. Packaged in a 624-pin CBGA. Implemented in .18 micron, 1.8V and 2.5V technology. PRODUCT BRIEF STS-192 SONET/SDH FRAMER AND POS/ATM MAPPER General Description The Ganges IC is a highly integrated VLSI device that provides fu……
