器件名称:
MC100E210FNR2
功能描述:
5V ECL Dual 1:4, 1:5 Differential Fanout Buffer
文件大小:
64.9KB 共8页
简 介:
MC100E210 5V ECL Dual 1:4, 1:5 Differential Fanout Buffer The MC100E210 is a low voltage, low skew dual differential ECL fanout buffer designed with clock distribution in mind. The device features two fanout buffers, a 1:4 and a 1:5 buffer, on a single chip. The device features fully differential clock paths to minimize both device and system skew. The dual buffer allows for the fanout of two signals through a single chip, thus reducing the skew between the two fundamental signals from a parttopart skew down to an outputtooutput skew. This capability reduces the skew by a factor of 4 as compared to using two LVE111’s to accomplish the same task. The lowest TPD delay time results from terminating only one output pair, and the greatest TPD delay time results from terminating all the output pairs. This shift is about 1020 pS in TPD. The skew between any two output pairs within a device is typically about 25 nS. If other output pairs are not terminated, the lowest TPD delay time results from both output pairs and the skew is typically 25 nS. When all outputs are terminated, the greatest TPD (delay time) occurs and all outputs display about the same 1020 pS increase in TPD, so the relative skew between any two output pairs remains about 25 nS. For more information on using PECL, designers should refer to Application Note AN1406/D. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input ……
