器件名称:
SP5730A/KG/MP1S
功能描述:
1.3 GHz Low Phase Noise Frequency Synthesiser
文件大小:
380.16KB 共12页
简 介:
SP5730 1.3 GHz Low Phase Noise Frequency Synthesiser Data Sheet November 2004 Features Complete 13 GHz Single Chip System for Digital Terrestrial Television Applications Selectable Reference Division Ratio, Compatible with DTT Requirements Optimised for Low Phase Noise, with Comparison Frequencies up to 4 MHz No RF Prescaler Selectable Reference/Comparison Frequency Output Four Selectable I2C Addresses I2C Fast Mode Compliant with 33V and 5V Logic Levels Four Switching Ports Functional Replacement for SP5659 (except ADC) Pin Compatible with SP5655 Power Consumption 120mW with VCC = 55V, all Ports off ESD Protection 2kV min., MIL-STD-883B Method 3015 Cat.1 (Normal ESD handling procedures should be observed) Ordering Information SP5730A/KG/QP1T 16 Pin QSOP SP5730A/KG/QP1S 16 Pin QSOP SP5730A/KG/MP1S 16 Pin SOIC SP5730A/KG/MP2S 16 Pin SOIC* SP5730A/KG/QP2T 16 Pin QSOP* SP5730A/KG/MP1T 16 Pin SOIC SP5730A/KG/MP2T 16 Pin SOIC* SP5730A/KG/QP2S 16 Pin QSOP* *Pb Free Matte Tin Tape & Reel Tubes Tubes Tubes Tape & Reel Tape & Reel Tape & Reel Tubes prescaler phase noise degradation over the full RF operating range. The comparison frequency is obtained either from an on-chip crystal controlled oscillator, or from an external source. The oscillator frequency, fREF, or phase comparator frequency, fCOMP, can be switched to the REF/ COMP output providing a reference for a second frequency synthesiser. The synthesiser is controlled via an 12C bus and is fast mode compliant. ……