基于新唐M0的M0516LAN的SIM900A的驱动测试

int SIM900A_gets(char *buf)
{
int ret=0;
int dly=3000000;// delay 3S

while(dly-->1)
{
if(UART1->FSR.RX_EMPTY == 0 )
{
*buf++ =UART1->DATA;//printf("%c",*(buf-1));
ret++;dly=10000;//delay 10ms
}
DrvSYS_Delay(1); //delay 1us
}
return ret;
}

void SIM900A_puts(const char *buf)
{
while(*buf)
{
while(UART1->FSR.TX_FULL == 1);
UART1->DATA =(*buf++)&0xff;//printf("%c",*(buf-1));
}
}

// AT+CPOWD=1 //Power down
// AT+CFUN=x //Power Saving
// AT+CBC//monitor the supply voltage
// AT+IPR=x//fixed baud rate ,“RDY” is received
// AT+CSCLK=1//enable the SLEEP mode
// AT+CMIC//adjust the input gain level of microphone
// AT+SIDET//set the side-tone level
// AT+CLVL//adjust the output gain level
// AT+CADC//read the voltage value on ADC

void SIM900A_test(void)
{
char buffer[128];

printf("");
printf("*** 9G-M0516 V1.00 Build byyuanxihua@21cn.comon ("__DATE__ " - " __TIME__ ")");
printf("*** 9G-M0516 V1.00 Rebooting ...");

SIM900A_init();

printf("SIM900A_test Send AT COMMAND @ 9600 bps !!!");

//SIM900A_puts("ATI");
SIM900A_puts("AT+GMM");
if(SIM900A_gets(buffer)>0)
{printf("%s",buffer);}
}

//源码完毕。－－缥缈九哥调试通过。

半主机的调试信息如下：

*** 9G-M0516 V1.00 Build byyuanxihua@21cn.comon (Jan 3 2012 - 13:16:32)
*** 9G-M0516 V1.00 Rebooting ...

SIM900A Open Success!!!
SIM900A_test Send AT COMMAND @ 9600 bps !!!

AT+GMM
SIMCOM_SIM900A

OK