51单片机-红外遥控解码
加入技术交流群
这段代码仍然有问题，正在调试中，路过的大牛希望给与指导：
#include ＜reg52.h＞
#define uint unsigned int
#define uchar unsigned char
uint irtime,startflag,i,bitnum,decodeok,receiveok;
uchar irdata[33],disp[8],vcode[4];
unsigned char code duan[]={ 0x3F,0x06,0x5B,0x4F,0x66,0x6D,0x7D,0x07,
0x7F,0x6F,0x77,0x7C,0x39,0x5E,0x79,0x71};
unsigned char code wei[]={ 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07};
void delay(int k){
int i,j;
for(i = 0; i ＜ k; i++)
for(j = 0; j ＜ 0xff; j++)
;
}
void Time0_Init(){
EA = 1;
ET0 = 1;
TH0 = 0x00;
TL0 = 0x00;
TMOD = 0x02;
TR0 = 1;
}
void Int0_Init(){
EA = 1;
IT0 = 1;
EX0 = 1;
}
void Irpro(){
disp[0] = vcode[0] / 16; //把十六进制的数转化成两位显示
disp[1] = vcode[0] % 16;
disp[2] = vcode[1] / 16;
disp[3] = vcode[1] % 16;
disp[4] = vcode[2] / 16;
disp[5] = vcode[2] % 16;
disp[6] = vcode[3] / 16;
disp[7] = vcode[3] % 16;
}
void display(){
for(i = 0; i ＜ 8; i++){
P1 = wei[ i];
P2 = duan[disp[ i]];
delay(1);
}
}
void decode(){
uint k,i,j;
uchar value;
j = 1;
for(k = 0; k ＜ 4; k++){
value = 0;
for(i = 0; i ＜ 8; i++){
if(irdata[j]＞6) //如果大于6个irtime是高电平
value |= 0x01 ＜＜ i; j++;
}
vcode[k] = value;
}
decodeok = 1;
}
void main(){
Time0_Init(); //对定时器中断进行初始化
Int0_Init(); //对下降沿中断进行初始化
while(1){
if(receiveok == 1){ //如果接受成功进行解码
receiveok = 0;
decode();
}
if(decodeok == 1){ //如果解码成功，转换一下格式准备显示
decodeok = 0;
Irpro();
}
display();
}
}
void time0() interrupt 1{ //由于是模式2，8位自动重装，所以一个irtime为256us
irtime++;
}
void int0() interrupt 0{
if(startflag){
if(irtime ＞ 32){ //如果是引导信息，则bitnum清零
bitnum = 0;
}
irdata[bitnum] = irtime; //装载数据，包括1位引导位，16位用户码，8位数据码和8位数据码反码
irtime = 0;
bitnum++;
if(bitnum == 33){ //装载数据完成
bitnum = 0;
receiveok = 1;
}
}
else{
startflag = 1; //遇到第一个下降沿让irtime为0，遇到第二个时计算用了多少个irtime
irtime = 0;
评论