产品介绍
ASMedia Technology Inc. was made up of outstanding team that had years experience in IC design field. Our product line includes USB3.0, PCIE bridge and Switch IC. As a No.1 USB3.0 device provider, we believe in professional knowledge and teamwork will lead us to the top.卓越團隊 祥碩科技代理商授权富利佳成立於2004年3月，為華碩電腦集團子公司，於2012年12月股票上市(股票代號:5269)。本公司專長於高速IC開發與設計。公司目前成員80% 以上為專業研發人員， 其中包含了數位邏輯設計、類比設計、軟體研發、系統研發以及實體設計團隊。 精良設計 祥硕科技ASMedia代理商富利佳，祥硕科技ASMedia一级代理商富利佳，祥硕科技ASMedia总代理， 祥硕科技ASMedia深圳代理商，祥硕科技ASMedia上海代理商，祥硕科技ASMedia北京代理商，祥硕科技ASMedia天津代理商，祥硕科技ASMedia东莞代理商，祥硕科技ASMedia福建代理商，祥硕科技ASMedia厦门代理商，祥硕科技ASMedia湖南代理商，祥硕科技ASMedia南昌代理商，祥硕科技ASMedia惠州代理商，祥硕科技ASMedia南京代理商，祥硕科技ASMedia香港代理商富利佳 High Speed Digital Switch USB 3.1 Gen 1/ Gen 2 Controller PCIE Bridge Controller SATA Controller Port Multiplier SATA RAID Controller PCIE to SATA Controller PCIE to SATA RAID Controller SATA Controller Port Multiplier ASM1092 ♦General Description Engaged in High Speed I/O solution and storage application development, ASMedia Technology is committed to enlarging product portfolio with introducing SATA 6Gbps Port Multiplier products. ASM1092 is Serial ATA port multiplier controller, supporting one host ports and two device drives, enabling Serial ATA PHY up to 6Gbps high speed interface, following Serial ATA Revision 3.0 Specification, completely the free loading for the system CPU, using for SATA port expansion, not only for internal system but also for external storage application. ♦Features ► General Features • Firmware downloadable by vender specific commands via SATA host port • FAN control support • Device plug-in detection capable • Selectable clock architecture with crystal mode or clock mode → 30MHz differential crystal or 30MHz single-end clock input • Integrated Core power switching regulator • Support 3.3V IO power supply and 1.2V Core power supply • Support SPI interface for external SPI ROM • Support Secondary SPI interface for specific customized application • Support I2C interface with both of master mode and slave mode • Support multiple GPIOs for LEDs and storage Power Control • Industry Specification Compliance: → Serial ATA Revision 3.0 Compliance → Serial PHY Electrical Specification Revision 1.1 → SATA II: Port Multiplier Specification Revision 1.0 • 7mmX7nn 48-pin QFN package • Green Package with RoHs Compliance ►Serial ATA Features • Support SATA Hot Plug for both of host port and device ports • Series ATA PHY 1i/1m/1u/2i/2m/2u/3i/3u compliance • Support SATA NCQ command • Support over 2TB drives • Programmable Spread Spectrum Control to enhance ENI performance • Support staggered spin-up • Support SATA Partial/Slumber • Power down capable and independent for each storage drive • SATA in-band commands support • Pass through support for vender specific commands ♦Package Type • QFN48L SATA RAID Controller ASM1092R ♦General Description Engaged in High Speed I/O solution and storage application development, ASMedia Technology is committed to enlarging product portfolio with introducing SATA 6Gbps Port Multiplier products. ASM1092R is Serial ATA RAID port multiplier controller, supporting one host ports and two devices ports, enabling Serial ATA PHY up to 6Gbps high speed interface, following Serial ATA Revision 3.0 Specification. It is used for SATA port expansion and performance aggregation. ASM1092R is uses ASMedia first generation proprietary Hydra technology, supporting RAID0 (Strip), RAID1 (Mirror), JBOD and Span (BIG) with low power and high efficient RAID operation, easy configurable scheme through GUI, completely the free loading for the system CPU. ASM1092R is useful for SATA port expansion and performance booster, not only for internal system but also for external storage application. ♦Features ►General Features • Firmware downloadable by vender specific commands via SATA host port • FAN control support • Drive plug-in detection capable • Selectable clock architecture with crystal mode or clock mode → 30MHz differential crystal or 30MHz single-end clock input • Integrated Core power switching regulator • Support 3.3V IO power supply and 1.2V Core power supply • Support SPI interface for external SPI ROM • Support I2C interface with both of master mode and slave mode • Support multiple GPIOs for LEDs and Storage Power Control • Industry Specifications Compliance: → Serial ATA Revision 3.0 Compliance → Serial PHY Electrical Specification Revision 1.0 → SATA II: Port Multiplier Specification Revision 1.1 • 7mmX7mm 48-pin QFN package • Green Package with RoHs Compliacne ► Serial ATA Features • Support SATA Hot Plug for both of host port and device ports • Series ATA PHY 1i/1m/1u/2i/2m/2u/3i/3u compliance • Support SATA NCQ command • Support over 2TB drives • Programmable Spread Spectrum Control to enhance ENI performance • Support staggered spin-up • Support SATA Partial/Slumber • Power down capable for each storage drive • SATA in-band commands support • Pass through support for vender specific commands ► Hydra Features • Support hardware RAID 0/1/JBOD/SPAM (BIG) mode • Support non PM aware and PM aware hosts • RAID mode switch by hardware strapping or GUI control • Failed or degraded drives detect and report • Automatic background rebuilding support • Auto recovery from checkpoint location • RAID error log • SMART drive monitoring ♦Package Type • QFN48L PCIE to SATA Controller ASM1062 ♦General Description The ASM1062 is ASMedia’s second generation Serial ATA Advantage HCI controller, bridges PCI Express Gen2 x2 to two ports of Serial ATA 6Gps, enables Serial ATA PHY up to 6Gps high speed interface, supports SRIS (Separate Refclk Independent SSC) function, complies with Serial ATA Revision 3.2 Specification. ASM1062 is highly integrated with ASMedia PCI Express and SATA 6Gbps self-designed PHYs. ASM1062 can be applied on PC, mobile, servers, IPC, consumer electronic devices, storage devices, and communication applications. ♦Features ►General Features • Embedded 8-bit microprocessor • Option Rom and firmware support through 64K Byte SPI flash • Two GPIO pins can be programmed for the LEDs of each SATA port • 20 MHz or 25 MHz external crystal • Integrated Core power switching regulator • 3.3V IO power and 1.2V Core power • Industry Specifications Compliance: → PCI Express Base Specification Rev.2.0 → PCI Express Card Electromechanical Rev.2.0 → Serial ATA AHCI Spec. Rev.1.3 → Serial ATA Revision 3.2 ►PCI Express Features • Support up to two lane of PCI Express • 2.5 and 5.0Gbps seed negotiation • Single virtual channel • Embedded Spread Spectrum Controller • Supports Separate Refclk Independent SSC • Supports PCI Express Link Layer Power Management • Supports Message Signaled Interrupt • 100MHz differential PCI Express reference clock in ►Serial ATA Features • Supports 2 ports Serial ATA PHY • 1.5Gbps, 3.0Gbps and 6.0Gbps seed negotiation • SATA PHY 1i/1m/2i/2m/3i • Supports AHCI and IDE programming interface • Supports Native Command Queue (NCQ) • Supports Port Multiplier command based switching • Support Partial and Slumber Power Management States • Supports Drive Power Control and Staggered Spin-up • Supports S.M.A.R.T feature ♦Package Type • Green package 8x8 QFN 64 (pb-free)-RoHS Compliant ASM1061 ♦General Description Engaged in High Speed I/O solution development, Asmedia Technology is committed to enlarging product portfolio with introducing PCI Express Products. The ASM1061, x1 PCI Express to two ports of Serial ATA, enables Serial ATA PHY up to 6Gbps high speed interface, following Serial ATA Revision 3.0 specification. ♦Features ►General Features • Option Rom support through 64K Byte SPI flash • 20MHz external crystal • Integrated 3.3V to 1.2V switch regulator • 3.3/1.2V Power Supply • Industry Specifications Compliance: → PCI Express Base Specification Rev. 2.0 → Bus Master Programming Interface to IDE ATA Controller Rev. 1.0 → PCI Express Card Electromechanical Rev . 2.0 → Serial ATA AHCI Spec. Rev.1.3 → Serial ATA Revision 3.0 ►PCI Express Features • x1 PCI Express lane for 2.5 and 5GHz signaling • Single virtual channel • SSC support • ECRC and Advanced Error Reporting capability • 100MHz differential PCI Express reference clock in • Maximum Payload up to 128 bytes ►Serial ATA Features • 2 ports Serial ATA PHY for 1.5, 3.0 and 6.0GHz signaling • Support IDE/AHCI mode • Support Native Gommand Queue (NCQ) • Support Gen 1m and Gen2m SATAPHY • Support Port Multiplier ♦PAckage Type • QFN 48L PCIE to SATA RAID Controller ASM1062R ♦General Description The ASM1062R is ASMedia’s second generation Serial ATA Advantage HCI controller, bridges PCI Express Gen2 x2 to two ports of Serial ATA 6Gps, integrates ASMedia Hydratek hardware RAID engine, enables Serial ATA PHY up to 6Gps high speed interface, supports SRIS (Separate Refclk Independent SSC) function, complies with Serial ATA Revision 3.2 Specification. ASM1062R is highly integrated with ASMedia PCI Express and SATA 6Gbps self-designed PHYs. ASM1062R can be applied on PC, mobile, servers, IPC, consumer electronic devices, storage devices, and communication applications. ♦Features ►General Features • Embedded 8-bit microprocessor • Option Rom and firmware support through 64K Byte SPI flash • Two GPIO pins can be programmed for the LEDs of each SATA port • 20 MHz or 25 MHz external crystal • Integrated Core power switching regulator • 3.3V IO power and 1.2V Core power • Industry Specifications Compliance: → PCI Express Base Specification Rev.2.0 → PCI Express Card Electromechanical Rev.2.0 → Serial ATA AHCI Spec. Rev.1.3 → Serial ATA Revision 3.2 ►PCI Express Features • Support up to two lane of PCI Express • 2.5 and 5.0Gbps seed negotiation • Single virtual channel • Embedded Spread Spectrum Controller • Supports Separate Refclk Independent SSC • Supports PCI Express Link Layer Power Management • Supports Message Signaled Interrupt • 100MHz differential PCI Express reference clock in ►Serial ATA Features • Supports 2 ports Serial ATA PHY • 1.5Gbps, 3.0Gbps and 6.0Gbps seed negotiation • SATA PHY 1i/1m/2i/2m/3i • Supports AHCI and IDE programming interface • Supports Native Command Queue (NCQ) • Supports Port Multiplier command based switching • Support Partial and Slumber Power Management States • Supports Drive Power Control and Staggered Spin-up ►RAID Features • Embedded hardware RAID engine • Supports RAID0,RAID1,SPAN • RAID mode changeable, controlled via the setting by two GPIOs or GUI utility • RAID0 high Performance for the data transmission • Supports S.M.A.R.T feature • Supports automatic rebuild • Supports high performance off-line rebuild • Supports background rebuild ♦Package Type • Green package 8x8 QFN 64 (pb-free)-RoHS Compliant ASM1061R ♦General Description The ASM1061R is ASMedia’s second generation Serial ATA Advantage HCI controller, bridges PCI Express Gen2 x1 to two ports of Serial ATA 6Gps, integrates ASMedia Hydratek hardware RAID engine, enables Serial ATA PHY up to 6Gps high speed interface, supports SRIS (Separate Refclk Independent SSC) function, complies with Serial ATA Revision 3.2 Specification. ASM1061R is highly integrated with ASMedia PCI Express and SATA 6Gbps self-designed PHYs. ASM1061R can be applied on PC, mobile, servers, IPC, consumer electronic devices, storage devices, and communication applications. ♦Features ►General Features • Embedded 8-bit microprocessor • Option Rom and firmware support through 64K Byte SPI flash • Two GPIO pins can be programmed for the LEDs of each SATA port • 20 MHz or 25 MHz external crystal • Integrated Core power switching regulator • 3.3V IO power and 1.2V Core power • Industry Specifications Compliance: → PCI Express Base Specification Rev.2.0 → PCI Express Card Electromechanical Rev.2.0 → Serial ATA AHCI Spec. Rev.1.3 → Serial ATA Revision 3.2 ►PCI Express Features • Support one lane of PCI Express • 2.5 and 5.0Gbps seed negotiation • Single virtual channel • Embedded Spread Spectrum Controller • Supports Separate Refclk Independent SSC • Supports PCI Express Link Layer Power Management • Supports Message Signaled Interrupt • 100MHz differential PCI Express reference clock in ►Serial ATA Features • Supports 2 ports Serial ATA PHY • 1.5Gbps, 3.0Gbps and 6.0Gbps seed negotiation • SATA PHY 1i/1m/2i/2m/3i • Supports AHCI and IDE programming interface • Supports Native Command Queue (NCQ) • Supports Port Multiplier command based switching • Support Partial and Slumber Power Management States • Supports Drive Power Control and Staggered Spin-up ►RAID Features • Embedded hardware RAID engine • Supports RAID0, RAID1, SPAN • RAID mode changeable, controlled via the setting by two GPIOs or GUI utility • RAID0 high Performance for the data transmission • Supports S.M.A.R.T feature • Supports automatic rebuild • Supports high performance off-line rebuild • Supports background rebuild ♦Package Type • Green Package 7x7 QFN 48 (pb-free)- RoHS Compliant 祥碩科技代理商富利佳主要產品線為高速switch IC、PCIE橋接晶片與USB3.0/3.1控制晶片，具高速實體層(PCIE Gen II/Gen III、SATA 6Gbps、USB2.0/3.0/3.1)自製研發能力。其客戶層囊括國內主要主機板廠與品牌OEM。 High Speed Digital Switch HDMI Level Shifter USB Switch SATA Switch Display Port USB/SATA/PEIC Re-driver Type C Mux PCIE Switch USB3.1 Gen 2 Re-Timer USB 3.1 Gen 1/ Gen 2 Controller PCIE Bridge Controller SATA Controller High Speed Digital Switch HDMI Level Shifter ASM1442K ♦General Description ASM1442K is the next generation high speed TMDS level shift ICs for High Definition Multimedia Interface (HDMI) and Digital Video Interface (DVI) video application, supporting the feature oif Deep Color and 3D video format and high video 4K resolution. Those convert low-swing AC-coupled differential input from existing PCI Express in the chipset of PC to HDMI compliant differential output, supporting up to 3.4 Gbps bandwidth of pixel data transition, as indicated in HDMI Rev1.4b. This conversion is automatic and transparent to the user. The devices operate at a single 3.3V supply. ♦ Application • PC Motherboard • Graphics Card • Notebooks • Docking Station ♦ Features • Coverts low-swing differential input to HDMI open-drain current steering Rx terminated differential output • HDMI/DVI level shifting operation up to 3.4 Gbps per lane • Maximum data transfer rate conform with HDMI Revision 1.4b specification • Supporting color depths greater than 24bits deep color mode • Supporting 3D video format and new content type • Supporting the high bus bandwidth for the high video 4Kx2K resolution display. • Support DC or AC coupling mode of data input via strapping control • Support input voltage level detection to squelch signal noise • Integrated 50Ω termination resistors for AC-coupled differential inputs. • Enable/Disable feature to turn on/off TMDS inputs and outputs to enter low-power state. • Output slew rate control on TMDS outputs to minimize EMI. • Transparent operation: no re-timing or software configuration required. • Integrated programmable receiving equalization. • Integrated Hot Plug Detect (HPD) level shifter • Integrated pull-down resistor on HPD input guarantees “input LOW” when no display is plugged in. • Integrated DDC level shifters, controlling by passgate through DDC_EN pin which allows 3.3V termination on PC chipset and 5V DDC termination on HDMI connector. • DDC_EN function support. • Improve EMI performance • 3.3V±10% single power supply. • ESD protection ability: HBM 4kV ♦ Package Type • 7x7 mm2 QFN 48L ASM1442 ♦General Description ASM1442T and ASM1442 are the high speed TMDS level shift ICs for High Definition Multimedia Interface (HDMI) and Digital Video Interface (DVI) video application. Those convert low-swing AC-coupled differential input from existing PCI Express in the chipset of PC to HDMI compliant differential output, supporting up to 3.4Gbps bandwidth of pixel data transition, as indicated in HDMI Rev1.3a. This conversion is automatic and transparent to the user. Only ASM1442T integrates an invertor to invert the signal of Hot Plug Detect. The devices operate at a single 3.3V supply. ♦Application • PC Motherboard • Graphics Card • Notebooks • Docking Station ♦Features • Coverts low-swing AC coupled differential input to HDMI v1.3 compliant open-drain current steering Rx terminated differential output. • HDMI/DVI level shifting operation up to 3.4Gbps per lane. • Integrated 50Ω termination resistors for AC-coupled differential inputs. • Enable/Disable feature to turn on/off TMDS inputs and outputs to enter low-power state. • Output slew rate control on TMDS outputs to minimize EMI. • Transparent operation: no re-timing or software configuration required. • Integrated programmable receiving equalization. • Integrated Hot Plug Detect (HPD) Inverting level shifter for ASM1442T. • Integrated Hot Plug Detect (HPD) level shifter for ASM1442. • Integrated pull-down resistor on HPD input guarantees “input LOW” when no display is plugged in. • Integrated DDC level shifters, • 3.3V±10% single power supply. • ESD protection ability: HBM 4kV ♦Package Type • QFN 48L • Lead free, RoHs compliance. USB Switch ASM1458 High Speed Digital Switch USB 3.1 Gen 1/ Gen 2 Controller USB3.1 to PCIE NVME USB3.1 Gen2 to SATA USB3.1 Gen1 to SATA USB3.1 Gen2 Host Controller USB3.1 Gen1 Host Controller USB3.1 Gen1 Hub PCIE Bridge Controller SATA Controller USB 3.1 Gen 1/ Gen 2 Controller USB3.1 Gen2 to SATA ASM235CM ♦ General Description Engaged in Universal Serial Bus I/O solutions and storage application developments, ASMedia Technology is committed on expanding product portfolio with introducing a new generation of USB 3.1 to SATA 6Gbps bridge solution for USB Type-C storage application. ASM235CM is the latest generation of ASMedia’s single chip solution, bridging the USB3.1 to Serial ATA host interface with highly integrated SuperSpeedPlus, SuperSpeed, High Speed, SATA 1.5/3.0/6.0 Gbps ASMedia self-designed PHYs as well as built-in CC logic circuit enabling reversible USB cable orientation and direction. Along with excellent compatibility with USB3.1 hosts and SATA devices, ASM235CM utilizes advanced process technology to optimize the chip power consumption. Customers can easily enhance their storage device performance with ASM235CM since it also integrates an 8-bit micro-processor and embedded RAM to provide a cutting edge solution in USB to SATA device enclosure market. High Speed Digital Switch USB 3.1 Gen 1/ Gen 2 Controller PCIE Bridge Controller PCIE Gen 3 Packet Switch PCIE to PCI Bridge Controller PCIE Gen 2 Packet Switch SATA Controller PCIE Bridge Controller PCIE Gen 3 Packet Switch ASM2806 ♦General Description ASMedia PCIe product ASM2806, a low latency, low cost and low power 6 lane , maximum 3 downstream ports packet switch. With upstream PCIe Gen3x2 bandwidth, ASM2806 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2- lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) or 8Gb(1GB/s) per lane ►Downstream PCIe interface • 4 lane PCIe® 3.1 interface supporting up to 4 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • 10x10 QFN88 ASM2812 ♦General Description ASMedia PCIe product ASM2812, a low latency, low cost and low power 12 lane , maximum 6 downstream ports packet switch. With upstream PCIe Gen3x4 bandwidth, ASM2812 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2-, or 4-lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) or 8Gb(1GB/s) per lane ►Downstream PCIe interface • 8 lane PCIe® 3.1 interface supporting up to 6 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • LFBGA 21x21, 492L ASM2824 ♦General Description ASMedia PCIe product ASM2824, a low latency, low cost and low power 24 lane , maximum 12 downstream ports packet switch. With upstream PCIe Gen3x8 bandwidth, ASM2824 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2-, 4-, or 8-lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) per lane ►Downstream PCIe interface • 16 lane PCIe® 3.1 interface supporting up to 12 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • LFBGA 21x21, 492L PCIE to PCI Bridge Controller ASM1085 ♦General Description Engaged in High Speed I/O solution development, Asmedia Technology is committed to enlarging product portfolio with introducing PCI Express Bridge Products. The ASM1085, x1 PCI Express to 32-bit PCI Bridge, enables users to connect legacy parallel bus devices to the advanced serial PCI Express interface. The ASM1085 is a PCI Express-to-PCI forward bridge, fully compliant with PCI-SIG PCI Express-to-PCI Bridge Specification1.0. ♦Features ►General Features • I2C Serial EEPROM support • Extensive PME support • 3.3/1.2V power supply • Legacy mode support • Industry Specifications Compliance: → PCI Express Base Specification Rev. 1.0a/ 1.1 → PCI Bus Power Management Interface Rev.2.0 → PCI Express Card Electromechanical Rev.2.0 → PCI Specification Rev.3.0 → PCIE to PCI/PCIX Bridge Specification Rev.1.0 • 14mmx14mm 128-pin LQFP package • Green package with RoHs compliance ►PCI Express Features • x1 PCI Express lane, at 2.5GHz signaling • Single virtual channel • SSC support • ECRC and Advanced Error Reporting capability • 100-MHz differential PCI Express reference clock in • Maximum Payload Size up to 128 bytes • No PCIe ASPM support ►PCI Features • Support PCI bus 33 MHz • Support 5 PCI masters • CLKRUN support • PME support • 5V tolerance ♦ Package Type • LQFP 128L ASM1083 ♦General Description Engaged in High Speed I/O solution development, Asmedia Technology is committed to enlarging product portfolio with introducing PCI Express Bridge Products. The ASM1083, x1 PCI Express to 32-bit PCI Bridge, enables users to connect legacy parallel bus devices to the advanced serial PCI Express interface. The ASM1083 is a PCI Express-to-PCI forward bridge, fully compliant with PCI-SIG PCI Express-to-PCI Bridge Specification1.0. ♦Features ►General Features • I2C Serial EEPROM support • Extensive PME support • 3.3/1.2V power supply • Legacy mode support • Industry Specifications Compliance: → PCI Express Base Specification Rev. 1.0a/ 1.1 → PCI Bus Power Management Interface Rev.2.0 → PCI Express Card Electromechanical Rev.2.0 → PCI Specification Rev.3.0 → PCIE to PCI/PCIX Bridge Specification Rev.1.0 • 14mmx14mm 128-pin LQFP package • Green package with RoHs compliance ►PCI Express Features • x1 PCI Express lane, at 2.5GHz signaling • Single virtual channel • SSC support • ECRC and Advanced Error Reporting capability • 100-MHz differential PCI Express reference clock in • Maximum Payload Size up to 128 bytes • No PCIe ASPM support ►PCI Features • Support PCI bus 33 MHz • Support 3 PCI masters • CLKRUN support • PME support • 5V tolerance ♦3. Package Type • LQFP 128L PCIE Gen 2 Packet Switch ASM1806 ♦General Description ASMedia PCIe product ASM1806, a low latency, low cost and low power 6 lane , maximum 3 downstream ports packet switch. With upstream PCIe Gen2x2 bandwidth, ASM1806 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2- lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) per lane ►Downstream PCIe interface • 4 lane PCIe® 2.0 interface supporting up to 4 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • 10x10 QFN88 ASM1812 ♦General Description ASMedia PCIe product ASM1812, a low latency, low cost and low power 12 lane , maximum 6 downstream ports packet switch. With upstream PCIe Gen2x4 bandwidth, ASM1812 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2- lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) per lane ►Downstream PCIe interface • 8 lane PCIe® 2.0 interface supporting up to 6 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • LFBGA 21x21, 492L ASM1824 ♦General Description ASMedia PCIe product ASM1824, a low latency, low cost and low power 24 lane , maximum 12 downstream ports packet switch. With upstream PCIe Gen2x8 bandwidth, ASM1824 can enable users to build up various high speed IO systems, including server, system storage or communication platforms. ♦Features ►Upstream PCIe interface • 1-, 2-, 4-, or 8-lane PCIe® connecting with root port • Automatic detection of lane configuration on boot-up • Supporting transfer rate of 2.5Gb(250MB/s), 5Gb(500MB/s) per lane ►Downstream PCIe interface • 16 lane PCIe® 2.0 interface supporting up to 12 PCIe® ports • Support L0s/L1/L23/L3 power saving states • Support L1 substate deep power saving mode • Support wake up function in S3/S4 • Support port disable by individual control • Support LTR • Support AER • Support SRIS on both upstream and downstream ports. • Max Payload Size = 512Byte • Support hot-plug, surprise remove ♦Package Type • LFBGA 21x21, 492L ASM1187e ♦General Description ASM1187e, PCI express packet switch, 1 PCIe x1 Gen2 upstream port to 7 PCIe x 1 Gen2 downstream ports, enable users to extend PCIe ports on mother board or embedded system. PCIe interface of ASM1187e is PCIe Base SPEC 2.0 compliance. ♦Features • Standard Compliant → PCI express base SPEC 2.0 and backward compatible with SEPC 1.1 & 1.0a → PCI Power management SPEC 1.2 • Port configuration →1 PCIe x1 lane Gen2 upstream port to 7 PCIe x1 lane Gen2 downstream ports →1 PCIe x1 lane Gen2 upstream port to 1 PCIe x 4 lane + 3 PCIe x1 lane downstream ports • PCIe power management → Link state L0, L0s, L1, L2/L3 Ready and L3 → Device state D0, D3 hot • Short latency delay • Integrate 100MHz PCIe differential clock buffer,no extra clock buffer needed. • Support I2C interface for debug usage • 10 x 10 QFN88 RoHS package ♦Package Type • 10 x 10 QFN88 ASM1184e ♦General Description ASM1184e, PCI express packet switch, 1 PCIe x1 Gen2 upstream port to 4 PCIe x 1 Gen2 downstream ports, enable users to extend PCIe ports on mother board or embedded system. PCIe interface of ASM1184e is PCIe Base SPEC 2.0 compliance. ♦Features • Standard Compliant → PCI express base SPEC 2.0 and backward compatible with SEPC 1.1 & 1.0a → PCI Power management SPEC 1.2 • Port configuration →1 PCIe x1 lane Gen2 upstream port to 4 PCIe x1 lane Gen2 downstream ports • PCIe power management → Link state L0, L0s, L1, L2/L3 Ready and L3 → Device state D0, D3 hot • Short latency delay • ntegrate 100MHz PCIe differential clock buffer,no extra clock buffer needed. • Support I2C interface for debug usage • 9 x 9 QFN64 RoHS package ♦Package Type • 9x9 QFN64 ASM1182e ♦General Description ASM1182e, PCI express packet switch, 1 PCIe x1 Gen2 upstream port to 2 PCIe x 1 Gen2 downstream ports, enable users to extend PCIe ports on mother board or embedded system. PCIe interface of ASM1182e is PCIe Base SPEC 2.0 compliance. ♦Features • Standard Compliant → PCI express base SPEC 2.0 and backward compatible with SEPC 1.1 & 1.0a → PCI Power management SPEC 1.2 • Port configuration → 1 PCIe x1 lane Gen2 upstream port to 2 PCIe x1 lane Gen2 downstream ports • PCIe power management → Link state L0, L0s, L1, L2/L3 Ready and L3 → Device state D0, D3 hot • Short latency delay • Integrate 100MHz PCIe differential clock buffer,no extra clock buffer needed. • Support I2C interface for debug usage • 7 x 7 QFN48 RoHS package ♦Package Type • 7x7 QFN48 ♦. Features • Compliant with USB3.1 Specification Revision 1.0 • Compliant with Type-C Specification Revision 1.1 • Compliant with USB Specification Revision 2.0 • Support USB Super-Speed Plus, USB Super-Speed, High-Speed and Full-Speed Operation • Support USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support USB Attached SCSI Protocol Specification Revision 1.0 • Compliant with Serial ATA Specification Revision 3.2 • Serial ATA bus up to 6Gbps Signal bandwidth • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode(28-bit LBA SATA devices are not supported due to OS limitations) • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vender Specific Application of USB Device Controller • Support multi-GPIO pins • Support programmable PWMs • Support 25 MHz with external crystal mode • Integrated two internal voltage regulator for IO power and Core ♦Package Type • Green Package 6x6 QFN 48L (Pb-free) ASM1352R ♦General Description Engaged in high speed I/O solutions and storage application developments, ASMedia Technology is committed on enlarging product portfolio by introducing USB 3.1 to SATA 6Gbps RAID/Port Multiplier solution. ASM1352R is ASMedia’s single chip solution to bridge the USB 3.1 to dual SATA interface. It is highly integrated with ASMedia SuperSpeedPlus, SuperSpeed, and High-sped and SATA self-designed PHYs.ASM1352R supports one USB 3.1 port and two SATA device ports, enabling USB PHY up to 10Gbps in compliance with USB 3.1 specifications and enabling Serial ATA PHYs up to 6Gbps high speed interface, following serial ATA Revision 3.2 Specification. ASM1352R integrates ASMedia’s proprietary HydraTeK technology, supporting RAID0 (Strip), RAID1 (Mirror), JBOD and Span (BIG) with low power and high efficiency RAID operation, easily configurable modes through GUI, completely free of resource loading on the system CPU. ASM1352R is useful for USB to SATA port expansion and performance boost, not only for internal design but also for external storage application. ♦Features ► General Features • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vendor Specific Application of USB Device Controller • Support I2C interface with both of master mode and slave mode • Support multiple GPIOs for LEDs and Storage Power Control • Firmware downloadable by vendor specific commands via SATA host port • FAN control support • Drive plug-in detection capable • Integrated Core power switching regulator • Support 3.3V IO power supply and 1.2V core power supply • Support 25MHz with external crystal mode • 8mmx8mm 64-pin QFN package • Green package with RoHS compliance ►USB Features • Support USB SuperSpeedPlus, USB SuperSpeed, High-Speed, and Full-Speed Operation. • Support Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support Universal Attached SCSI Protocol Specification Revision 1.0 • Compliant with USB3.1 Specification Revision 1.0 • Compliant with USB specifications Revision 2.0 ►Serial ATA Features • Serial ATA bus up to 6Gbps Signal bandwidth • Serial ATA PHY 1i/1m/1u/2i/2m/2u/3i/3u compliance • Support SATA NCQ command • Support over 2TB drives • Staggered spin-up • SATA Partial/Slumber support • Power down capable for each storage drive • SATA in-band commands support • Pass through support for vendor specific commands • Compliant with Serial ATA Specification Revision3.2 • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance. • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode ►Hydratek Features • Support hardware RAID 0/1/JBOD/SPAN (BIG) mode • RAID mode switch by hardware strapping • Failed or degraded drives detection and report • Automatic background rebuilding support • Auto recovery from checkpoint location • RAID error log • SMART drive monitoring ♦Package Type • Green Package 8x8 QFN 64L (PL-free) ASM1351 ♦General Description Engaged in Universal Serial Bus I/O solutions and storage application developments, ASMedia Technology is committed on expanding product portfolio with introducing a new generation of USB3.1 to SATA 6Gbps bridge solution. ASM1351 is latest generation of ASMedia’s single chip solution, bridging the USB3.1 to Serial ATA host interface with highly integrated SuperSpeedPlus, SuperSpeed, High speed, and SATA1.5/3.0/6.0Gbps ASMedia self-designed PHYs. Along with excellent compatibility with USB3.1 hosts and SATA devices, ASM1351 utilizes advanced process technology to optimize the chip power consumption. Furthermore, it is also pin-to-pin backward compatible with existing ASM1153E. Customer can easily enhance their storage device performance with ASM1351 since it also integrates an 8-bit micro-processor and embedded RAM to provide a cutting edge solution in USB to SATA device enclosure market. ♦Features • Compliant with USB3.1 Specification Revision 1.0 • Compliant with USB Specifications Revision 2.0 • Support USB Super-speed Plus, USB Super-Speed, High-Speed and Full-Speed Operation • Support USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support USB Attached SCSI Protocol Specification Revision 1.0 • Compliant with Serial ATA Specification Revision 3.2 • Serial ATA bus up to 6Gbps Signal bandwidth • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vender Specific Application of USB Device Controller • Support multi-GPIO pins • Support programmable PWMs • Support 25/30MHz with external crystal mode • Integrated two internal voltage regulator for IO power and Core ♦Package Type • Green Package 6x6 QFN 48L (Pb-free) USB3.1 to PCIE NVME ASM2362 ♦General Description ASM2362 is an ASMedia first generation PCI Express(downstream port) to USB3.1(UFP) bridge, featuring interface of PCI Express Gen3 x2 and one USB3.1 Gen2 device port, providing high bandwidth up to 10Gbps between PCI Express Gen3 x2 bus and USB 3.1 SuperSpeedPlus bus. It uses for external USB3.1 Gen2 NVM Express SSD application without additional driver, reaching over 1000MB/s excellent benchmark performance, integrating USB 10Gbps mux and Configuration Channel bus for type-C connector, supporting PCI Express M.2 socket, CF Express and SSD U.2 form factor, saving power consumption through USB and PCI Express Link power management and Chip power management, compliant with NVM Express revision 1.2.1, PCI Express Base Spec Revision 3.1a, USB3.1 Revision 1.0 and USB type-C Revision 1.3. ASM2362 is highly integrated with ASMedia USB3.1 Gen2 and PCI Express Gen3 self-designed PHYs, supplying 3.3V and 1.05V voltage, applying local 25MHz crystal, using 9x9 QFN64 RoHS Green package, supporting variable GPIOs for customized function. Target applications is for USB3.1 Gen2 NVM Express SSDs for high performance external SSD or on board SSD on PC, laptop, servers, docking stations and embedded system ♦Features ►General Feature • USB to PCI Express NVMe SSD bridge • Integrated 10Gbps mux for type-C application • Integrated CC Logic for type-C application • Support SPI interface with external ROM for customized RAM code • Support I2C and GPIOs and UART interface • Internal 3.3V to 2.5V LDO • Local 25MHz crystal ►Universal Serial Bus Feature • Support up to USB3.1 Gen2 • Support BOT and UAS Protocol • Support USB Link power management • Support USB Hot Plug • Support Spread Spectrum Clock Control • Support unmap command set • Support ATA passthrough command set • Support vender specific command set • Compliant with Universal Serial Bus 3.1 Revision 1.0 • Compliant with USB Type-C spec Release 1.3 ►PCI Express Feature • Support up to PCI Express Gen3 x2 • Support PCI Express NVMe SSD without driver • Support Spread Spectrum Clock Control • 100MHz differential reference clock output • Support variable types of PCI Express socket including M.2 and U.2 and so on. • Support PCI Express Link power management • Compliant with PCI Express base spec Revision 3.1a • Compliant with PCIe M.2 Revision 1.0 ►NVM Express Feature • Support NVMe power management • Support NVMe: SCSI Translation Reference Revision 1.5 • Support Trim command set • Support NVMe Error Reporting & Recovery • S.M.A.R.T drive monitoring • Compliant with NVMe Revision 1.3c ♦Package Type • Green Package 4x4 mm2 QFN 32 (Pb-free) • RoHS Compliance USB3.1 Gen1 to SATA ASM225CM ♦General Description Engaged in Universal Serial Bus I/O solutions and storage application developments, ASMedia Technology is committed on expanding product portfolio with introducing a new generation of USB 3.1 to SATA 6Gbps bridge solution for USB Type-C storage application. ASM225CM is the latest generation of ASMedia’s single chip solution, bridging the USB3.1 to Serial ATA host interface with highly integrated SuperSpeed, High Speed, SATA 1.5/3.0/6.0 Gbps ASMedia self-designed PHYs as well as built-in CC logic circuit enabling reversible USB cable orientation and direction. Along with excellent compatibility with USB3.1 hosts and SATA devices, ASM225CM utilizes advanced process technology to optimize the chip power consumption. Customers can easily enhance their storage device performance with ASM225CM since it also integrates an 8-bit micro-processor and embedded RAM to provide a cutting edge solution in USB to SATA device enclosure market. ♦ Features • Compliant with USB3.1 Specification Revision 1.0 • Compliant with Type-C Specification Revision 1.1 • Compliant with USB Specification Revision 2.0 • Support USB Super-Speed Plus, USB Super-Speed, High-Speed and Full-Speed Operation • Support USB Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support USB Attached SCSI Protocol Specification Revision 1.0 • Compliant with Serial ATA Specification Revision 3.2 • Serial ATA bus up to 6Gbps Signal bandwidth • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode (28-bit LBA SATA devices are not supported due to OS limitations) • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vender Specific Application of USB Device Controller • Support multi-GPIO pins • Support programmable PWMs • Support 25 MHz with external crystal mode • Integrated two internal voltage regulator for IO power and Core ♦Package Type • Green Package 6x6 QFN 48L (Pb-free) ASM1153 ♦Gerenal Description Engaged in Universal Serial Bus I/O solution and storage application development, ASMedia Technology is committed to expand product portfolio with introducing a new generation of USB3.0 to SATA bridge products. ASM1153 is the ASMedia third generation single chip solution, bridging the USB3.0 to Serial SATA host interface with highly integrated SuperSpeed USB3.0, High Speed USDB2.0 and SATA1.5/3.0 Gbps ASMedia self -designed PHYs. Along with excellent compatibility with USB3.0 host and SATA device, ASM1053 uses advanced process technology to optimize the chip power consumption. Furthermore, it is also pit-to -pin backward compatible with existing ASM1053. Customers can easily enhance their storage device performance with ASM1153 since it also integrates an 8-bit micro-processor and embedded RAM to provide a cutting edge solution in USB to SATA device enclosure market. ♦Features • Compliant with USB3.0 Specification Revision 1.0 • Compliant with USB Specification Revision 2.0 • Support USB Super-Speed, High-Speed and Full-Speed Operation • Support Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support USB Attached SCSI Protocol Specification Revision 1.0 • Compliant with Serial ATA Specification Revision 2.6 • Serial ATA bus up to 3Gbps Signal bandwidth • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI performance • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vender Specific Application of USB device Controller • Support multi-GPIO pins • Support programmable PWMs • Support 20/25/30MHz with external crystal mode or 30MHz with Clock input mode via strapping • Integrated two internal voltage regulator for IO power and Core • HBM ESD 2KV and MM ESD 200V ♦Package Type • Green Package 6X6 QFN 48L(Pb-free) ASM1153E ♦General Description Engaged in Universal Serial Bus I/O solution and storage application development, Asmedia Technology is committed to expand product portfolio with introducing a new generation of USB3.0 to SATA 6Gbps bridge products. ASM1153E is the ASMedia third generation single chip solution, bridging the USB3.0 to Serial SATA host interface with highly integrated SuperSpeed USB3.0, High Speed USDB2.0 and SATA1.5/3.0/6.0 Gbps ASMedia self -designed PHYs. Along with excellent compatibility with USB3.0 host and SATA device, ASM1153E uses advanced process technology to optimize the chip power consumption. Furthermore, it is also pit-to-pin backward compatible with existing ASM1053. Customers can easily enhance their storage device performance with ASM1153 since it also integrates an 8-bit micro-processor and embedded RAM to provide a cutting edge solution in USB to SATA device enclosure market. ♦Features • Compliant with USB3.0 Specification Revision 1.0 • Compliant with USB Specification Revision 2.0 • Support USB Super-Speed, High-Speed and Full-Speed Operation • Support Mass Storage Class, Bulk-Only Transport Specification Revision 1.3 • Support USB Attached SCSI Protocol Specification Revision 1.0 • Compliant with Serial ATA Specification Revision 3.0 • Serial ATA bus up to 6Gbps Signal bandwidth • Support Spread Spectrum Control of USB3.0 and SATA interface to improve the EMI Performance • Support ATA/ATAPI Packet Command Set • Support ATA/ATAPI LBA48 addressing mode • Integrated 8-bit micro-processor with embedded program RAM and ROM • Support SPI NVRAM for Vender Specific Application of USB device Controller • Support multi-GPIO pins • Support programmable PWMs • Support 20/25/30MHz with external crystal mode or 30MHz with Clock input mode via strapping • Integrated two internal voltage regulator for IO power and Core • HBM ESD 2KV and MM ESD 200V ♦Package Type • Green Package 6X6 QFN 48L(Pb-free) USB3.1 Gen2 Host Controller ASM3142 ♦ General Description ASMedia ASM3142 is the next generation Universal Series Bus xhci host controller, bridging PCI Express to USB3.1 Gen-II, compliant with USB3.1 Specification Revision 1.0 and Intel eXtensible Host Controller Interface specification revision 1.1. It also supports backward compatible with legacy USB function and devices, compliant with USB Attach SCSI Protocol revision 1.0, supporting the function of debugport on port A of USB. ASMedia ASM3142 also supports the new feature of USB3.1 Gen2, named Multiple INs to achieve fully utilization rate of 10Gbps data rate, taking advantage of the available bandwidth of USB3.1 Gen2 bus. ASM3142 supports two USB3.1 Gen-II ports and perform trusting high speed bandwidth with PCI Express Gen-III x2 supporting. It uses advance process with low voltage supply, following standard PCI Express/USB bus power management and advance chip power management to reduce total power consumption efficiently under idle/standby state. ASM3142 integrates ASMedia self-designed PCI Express/SuperSpeed USB/USB2.0 PHY, supporting the proprietary driver for Windows 7 and in box driver for Windows 8.0, Windows 8.1, Windows 10 and various Linux kernels. The application of ASM3142 includes Motherboard, Desktop PC, Notebooks, Workstations, Servers, Add-in cards, PCI Express based embedded platform. ♦Features ►General Feature • Bridge PCI Express to USB3.1 • Integrate eXtensible Host Controller • Compliant with eXtensible Host Controller Interface specification Revision 1.1 • Upload firmware through external SPI ROM • External 20MHz differential crystal • Support driver on Windows7, Windows8, Windows 8.1, and Windows 10 • Support various Linux kernels ►PCI Express Feature • Support PCI Express Gen-III x2 • Support high bandwidth performance with low latency • Support PCI Express Link power management • Compliant with PCI Express Base 3.0 Specification • Compliant with PCI Express Card Electromechanical 2.0 specification • Compliant with PCI Express Mini Card Electromechanical 1.2 specification • Compliant with PCI Bus Power Management Interface Specification Revision 1.2 • Compliant with PCI Local Bus Specification Revision 3.0 • Integrate Spread Spectrum Controller for PCI Express interface • Overclock capability on PCI Express bus • Support SRIS mode • Not support lane reversal ►USB Feature • Support two ports of USB3.1 • Up to USB3.1 Gen-II 10Gbps • Compliant with Universal Serial Bus 3.1 Specification Revision 1.0 • Compliant with Universal Serial Bus Specification Revision 2.0 • Compliant with USB Attached SCSI Protocol Revision 1.0 • Support Muliple INs function • Support USB3.1 and USB2.0 Link Power Management • Support Control, Bulk, Stream, Interrupt, Isochronous transfer type • Support independent port power control • Support overcurrent detection • Support Remote/Wakeup event • Integrate Spread Spectrum Controller for USB3.1 interface • Backward compatible with Legacy USB function and device • Support the Debugport ♦Package Type • Green Package 9x9 QFN64 (Pb-free) - RoHS Compliance ASM2142 ♦ General Description ASMedia ASM2142 is the new generation Universal Series Bus xhci host controller, bridging PCI Express to USB3.1 Gen-II, compliant with USB3.1 Specification Revision 1.0 and Intel eXtensible Host Controller Interface specification revision 1.1. It also supports backward compatible with legacy USB function and devices, compliant with USB Attach SCSI Protocol revision 1.0, supporting the function of debugport on port A of USB. ASM2142 supports two USB3.1 Gen-II ports and perform trusting high speed bandwidth with PCI Express Gen-III x2 supporting. It uses advance process with low voltage supply, following standard PCI Express/USB bus power management to save more power consumption. ASM2142 integrates ASMedia self-designed PCI Express/SuperSpeed USB/USB2.0 PHY, supporting the proprietary driver for Windows 7 and in box driver for Windows 8.0, Windows 8.1, Windows 10 and various Linux kernels. The application of ASM2142 includes Motherboard, Desktop PC, Notebooks, Workstations, Servers, Add-in cards, PCI Express based embedded platform. ♦ Features ►General Feature • Bridge PCI Express to USB3.1 • Integrate eXtensible Host Controller • Compliant with eXtensible Host Controller Interface specification Revision 1.1 • Upload firmware through external SPI ROM • External 20MHz differential crystal • Support driver on Windows7, Windows8, Windows 8.1, and Windows 10 • Support various Linux kernels ►PCI Express Feature • Support PCI Express Gen-III x2 • Support high bandwidth performance with low latency • Support PCI Express Link power management • Compliant with PCI Express Base 3.0 Specification • Compliant with PCI Express Card Electromechanical 2.0 specification • Compliant with PCI Express Mini Card Electromechanical 1.2 specification • Compliant with PCI Bus Power Management Interface Specification Revision 1.2 • Compliant with PCI Local Bus Specification Revision 3.0 • Integrate Spread Spectrum Controller for PCI Express interface • Overclock capability on PCI Express bus • Support SRIS mode • Not support lane reversal ►USB Feature • Support two ports of USB3.1 • Up to USB3.1 Gen-II 10Gbps • Compliant with Universal Serial Bus 3.1 Specification Revision 1.0 • Compliant with Universal Serial Bus Specification Revision 2.0 • Compliant with USB Attached SCSI Protocol Revision 1.0 • Support USB3.1 and USB2.0 Link Power Management • Support Control, Bulk, Stream, Interrupt, Isochronous transfer type • Support independent port power control • Support overcurrent detection • Support Remote/Wakeup event • Integrate Spread Spectrum Controller for USB3.1 interface • Backward compatible with Legacy USB function and device ♦Package Type • Green Package 9x9 QFN64 (Pb-free) - RoHS Compliance ASM1142 ♦General Description ASM1142 is an ASMedia first Universal Serial Bus 3.1 host controller, compliant with Intel eXtensible Hot Controller Interface specification revision 1.1, bridging PCI Express interface to two ports of USB3.1, up to 10Gbps high speed bandwidth, backward compatible with legacy USB function and devices. It can configure PCI Express as Gen2x2 or Gen3x1, compliant with USB Attach SCSI Protocol revision 1.0, supporting the functions of debugport. ASM1142 integrates ASMedia self-designed PCI Express/USB 3.1 PHY, and it also integrates two internal regulators to supply normal core power and suspend core power, supporting the driver on Windows 7, Windows 8.0, Windows 8.1 and various Linux Kernels. The application of ASM1142 includes Motherboard, Desktop PC, Notebooks, Workstations, Servers, Add-in card, PCI Express based embedded platform. ♦Features • General Feature • Bridge PCI Express to USB 3.1 • Upload firmware through BIOS or external SPI ROM • External 20MHz differential crystal • Overclock capability on PCI Express bus under asynchronous mode • integrate Spread Spectrum controller for PCI Express and USB3.1 interface • Integrate two regulators for normal core power supply and suspend core power supply • Support driver on Windows 7, Windows 8, and Windows 8.1 • Support various Linux Kernels ♦PCI Express Feature • Support PCI Express Gen2x2 or Gen3x1 • Up to 10Gbps bandwidth performance with low latency • Support PCI Express Link power management • Compliant with PCI Express Base 3.0 Specification • Compliant with PCI Express card Electromechanical 2.0 specification • Compliant with PCI Express Mini Card Electromechanical 1.2 specification • Compliant with Express Card Standard Revision 2.0 • Compliant with PCI Bus Power Management Interface Specification Revision 1.2 • Compliant with PCI Local Bus Specification Revision 3.0 • Support overclocking capability on PCI Express interface ♦USB Feature • Support two port of USB3.1 • Compliant with Universal Serial Bus 3.1 Specification Revision 1.0 • Compliant with Universal Serial Bus Specification Revision 2.0 • Compliant with eXtensible Host Controller Interface specification Revision 1.1 • Compliant with USB Attached SCSI Protocol Revision 1.0 • Support USB3.1 and USB2.0 Link Power Management • Support Control, Bulk, Stream, Interrupt, Isochronous transfer type • Support independent port power control • Support over current detection • Support Remote/Wakeup event • Backward compatible with Legacy USB function and device • Support the Debugport ♦Package Type • Green package 9x9 QFN64 (Pb-free)-RoHS Compliance USB3.1 Gen1 Host Controller ASM1042A ♦General Description The ASM1042A is ASMedia’s new generation of Universal Serial Bus 3.0 extended host controller, bridging PCI Express to two ports of USB3.0, ASM1042A is designed for high speed, low power data transmit, backward compatible with current USB2.0 standard and complies with Intel’s eXtensible Host Controller Interface (xHCI) Revision1.0. The ASM1042A supports UASP (USB Attach SCSI Protocol) and Debugport function. It is certified for Win8 WHCK and is supported by Linux and MAC OS platforms. ASM1042A is highly integrated with ASMedia PCI Express, SuperSpeed USB and USB2.0 self-design PHYs. The application of ASM1042A includes PC, mobile, consumer electronic device and communication application. ♦Features ► General Feature • Bridge one lane PCI Express Gen II to two ports of USB3.0 • Upload the firmware through BIOS support or external SPI ROM • Flexible clock design via external 20MHz differential crystal or 48MHz single-end clock input • Overclock capability on PCI Express bus under asynchronous mode • Integrated Spread Spectrum Controller for PCI Express and USB3.0 interface • Support Windows, Linux and MAC OS Platform • 3.3V IO power supply and 1.05V core power supply ► PCI Express Feature • Support one lane PCI Express • UP to 5Gbps bandwidth performance with low latency • Compliant with PCI Express Base 2.0 Specification • Support PCI Express Card Electromechanical 2.0 Specification • Support PCI Bus Power Management Interface Specification Revision1.2 • Support Express Card Standard Revision 2.0 • Support overclocking capability on PCI Express Interface ► USB Feature • Compliant with USB 3.0 Specification Revision 1.0 • Compliant with USB Specification Revision 2.0 • Compliant with xHCI specification Revision 1.0 • Compliant USB Attached SCSI Protocol Revision1.0 • Support USB Super-Speed, High-Speed, Full-Speed and Low Speed Operation • Support Control, Bulk, Stream, Interrupt, lsochronous transfer type • Support independent port power control and over current detection • Support Legacy device and Wakeup event • Support the function of Debugport ♦Package type • Green package 8X8 QFN64 and 6X6 QFN48 (Pb-free)-RoHs Compliance USB3.1 Gen1 Hub ASM1074 ♦General Description Engaged in Gigabit Data transfer Speed I/O solution development, Asmedia Technology is committed to enlarging product portfolio with introducing USB3.0 HUB controller Products. The ASM1074, the four downstream ports USB3.0 HUB Controller, highly integrated with ASMedia SuperSpeed USB3.0 and USB2.0 self-design PHYs, enables high speed PHY interface up to 5Gbps, following Universal Series Bus 3.0 Revision 1.0 Specification. ♦Features ►USB3.0 HUB Features • Universal series Bus 3.0 Revision 1.0 Compliance • Upstream Port support SuperSpeed, High-Speed and Full-Speed Connections • Four Downstream Ports support SuperSpeed, High-Speed, Full-Speed and Low-Speed Connections • Implement USB3.0 power management function • SuperSpeed Link Power Management support • USB2.0 Link Power Management support • USB Attached SCSI Protocol Revision 1.0 Compliance • Multiple Transaction Translator support • Port Power Switching and Over-Current Protection per port control • Individual and Gang mode selectable via strappin
ARTESYN开关电源供应器
铅酸电池充电器_电瓶充电器_12V铅酸电池充电器
PCM话路分析仪(PCM Channel Analy
可编程直流稳压电源 Agilent 6632B