首页 | 嵌入式系统 | 显示技术 | 模拟IC/电源 | 元件与制造 | 其他IC/制程 | 消费类电子 | 无线/通信 | 汽车电子 | 工业控制 | 医疗电子 | 测试测量
首页> 分享下载> 无线/通信> 【应用手册】AN 570: Implementing the 40G/100G Ethernet Protocol in Stratix IV Devices

【应用手册】AN 570: Implementing the 40G/100G Ethernet Protocol in Stratix IV Devices

资料介绍
【应用手册】AN 570: Implementing the 40G/100G Ethernet Protocol in Stratix IV Devices
Altera’s 40 nm Stratix® IV GX and Stratix IV GT devices provide a complete solution
for developing 40 Gbps and 100 Gbps network line card applications.
This application note describes how to implement a 40 Gbps/100 Gbps (40G/100G)
Ethernet line-side interface using Stratix IV GT devices. It focuses on the following
two implementation aspects:
■ Transceiver configuration and clocking recommended for 40G/100G Ethernet
■ Interfacing 40G/100G Ethernet Soft IP to the transceivers
Figure 1 shows an example 40G/100G network line card application with Stratix IV
GT and Stratix IV GX devices.
AN 570: Implementing the 40G/100G
Ethernet Protocol in Stratix IV Devices

AN-570-1.2 Application Note




Introduction
Altera’s 40 nm Stratix IV GX and Stratix IV GT devices provide a complete solution
for developing 40 Gbps and 100 Gbps network line card applications.
This application note describes how to implement a 40 Gbps/100 Gbps (40G/100G)
Ethernet line-side interface using Stratix IV
标签: AlteraFPGAStratixIV40G100GEthernetProtocol
【应用手册】AN 570: Implementing the 40G/100G Ethernet Protocol in Stratix IV Devices
本地下载

评论