资料介绍
programming-the-rl78-flash-memory-using-an-external-device.pdf
RL78 Blog: Programming the RL78 flash
memory using an external device
John Donovan 2012-8-18
Almost any embedded development project requires storing your code in the
MCU’s flash memory. There are two ways to program the flash memory in an
RL78 using an external device:
Writing to flash using a flash memory programmer
Writing to flash using an external device that incorporates a UART
The RL78 incorporates firmware that controls flash memory programming, which in turn
involves exchanging commands with the MCU via serial communication, for which the RL78
provides both single-wire and two-wire UART connections.
Using the single-wire UART
In an earlier RL78 blog post Maury introduced the PG-FP5 dedicated flash memory
programming tool. The PG-FP5 talks to the RL78 usi