新闻中心

EEPW首页>嵌入式系统>设计应用> s3c2410内核的起始地址

s3c2410内核的起始地址

作者: 时间:2016-11-10 来源:网络 收藏
在linux-2.6.24.4/arch/arm/kernel/head.S中有这样的一段话。

* swapper_pg_dir is the virtual address of the initial page table.

本文引用地址://m.amcfsurvey.com/article/201611/317275.htm

* We place the page tables 16K below KERNEL_RAM_VADDR.Therefore, we must

* make sure that KERNEL_RAM_VADDR is correctly set.Currently, we expect

* the least significant 16 bits to be 0x8000, but we could probably

* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.

大致的意思是,在KERNEL_RAM_VADDR(内核的在RAM中的地址)下面16K(16bit,也就是说是32Kb,0x8000)的地方放着初始化页表的虚拟地址,因此至少在RAM的起始地址还有偏移0x8000才能开始放内核。



评论


技术专区

关闭