AVR M16实验之十 串口

/**********************************************************************
* 文件名称: main.c
* 程序作者: kidcao1987
* 程序版本: V1.0
* 功能描述: 接上串口，在串口调试助手里显示
“Serial Communication Test!
曹佃生的串口测试程序!!QQ:289718970
http://bbs.cepark.com”
* 编译器：WinAVR-20090313
* 芯片：ATmega16,外部11.0592MHZ晶振
* 技术支持：http://bbs.cepark.com
**********************************************************************/

#include
#include
#include

#define BAUD 9600

volatile unsigned char ucReceivedData; //接收到的数据
unsigned char const ucStr1[]={"Serial Communication Test!"};
unsigned char const ucStr2[]={"曹佃生的串口测试程序!!QQ:289718970"};
unsigned char const ucStr3[]={"http://bbs.cepark.com"};


void USARTInit(void); //初始化
void USARTTransmitData(unsigned char); //发送数据
void USARTTransmitString(unsigned char const *pStr); //发送字符串


int main(void)
{
PORTD = 0x03;
DDRD = 0x02; //PD0输入 PD1输出

PORTB = 0xff;
DDRB = 0xff; // LED指示灯

USARTInit();

USARTTransmitString(ucStr1);
USARTTransmitString(ucStr2);
USARTTransmitString(ucStr3);
sei();
while(1)
{
USARTTransmitString(ucStr1);
USARTTransmitString(ucStr2);
USARTTransmitString(ucStr3);
USARTTransmitData(0x0d);
USARTTransmitData(0x0a);
_delay_ms(2000);
}
}


void USARTInit(void) //初始化
{
UCSRA = 0X00;
UCSRC |= (1< UBRRL = (11059200 / BAUD / 16 - 1) % 256; //波特率设置为9600
UBRRH = (11059200 / BAUD / 16 - 1) / 256;
UCSRB |= (1 << RXCIE) | (1 << RXEN) | (1 << TXEN); //接收中断使能，接收使能，发送使能
}



void USARTTransmitData(unsigned char ucTransmitData)
{
while(!(UCSRA & (1<
UDR = ucTransmitData; //发送
}



void USARTTransmitString(const unsigned char* pStr)
{
while(*pStr != )
{
USARTTransmitData(*pStr++);
}
USARTTransmitData(0x0d);
USARTTransmitData(0x0a);
}


ISR(USART_RXC_vect)
{
ucReceivedData = UDR; //读数据

PORTB = ucReceivedData; //点亮LED
USARTTransmitData(ucReceivedData); //发送数据
}

本文引用地址： //m.amcfsurvey.com/article/201611/321119.htm

视频地址：http://v.youku.com/v_show/id_XMTYxNTExMDcy.html