器件名称:
EP3001
功能描述:
Evaluation Board Manual
文件大小:
93.52KB 共4页
简 介:
EP3001 Evaluation Board Manual DESCRIPTION This manual aims to illustrate how to use the EP3001 Evaluation Board (“EP3001 EVB”). The EP3001 EVB is a constant-frequency buck regulator, using the EP3001, 1.5MHz, 600mA Synchronous Step-down Converter. The EP3001 EVB is available for input voltage range from 2.5V to 5.5V. The EP3001 EVB is capable of delivering up to 600mA of output current at minimum input voltage of 3V, or even up to 800mA under certain specific condition. This manual includes Quick Start for using the EP3001 EVB, Demonstration Circuit, PCB Layout and Bill of Material for the EP3001 EVB. QUICK START The EP3001 EVB is easy to set up to evaluate the performance of the EP3001. For proper measurement equipment setup, please follow the explanation below: Fixed Voltage Type 1. Connect the power supply to the Vin and GND terminals, respectively, on the right side of the EVB. (Do NOT hot-plug Vin or increase Vin over the rated maximum supply voltage of 6V, or the part may be damaged.) 2. Connect the load between the Vout and GND terminals, respectively. 3. Connect the required measurement equipments, refer to Figure 1. 4. Turn on the power supply. 5. Measure Vin, Vout, Iin and Iout. Adjustable Type 1. Select the shunt at JP4 for different output voltage. IF the Vout required is not listed in the EVB, please see Output Programming section. 2. Connect the power supply to the Vin and GND terminals, respectively, on the right side of the EVB. (Do NOT hot-plug Vin or in……
