器件名称:
MC100E116FNR2G
功能描述:
5V ECL Quint Differential Line Receiver
文件大小:
138.18KB 共9页
简 介:
MC10E116, MC100E116 5V ECL Quint Differential Line Receiver Description The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116, the E416 device may be of interest. Active current sources plus a deep collector feature of the MOSAIC III process provide the receivers with excellent common-mode noise rejection. Each receiver has a dedicated VCCO supply lead, providing optimum symmetry and stability. If both inverting and non-inverting inputs are at an equal potential of > 2.5 V, the receiver does not go to a defined state, but rather current-shares in normal differential amplifier fashion, producing output voltage levels midway between HIGH and LOW, or the device may even oscillate. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 mF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The 100 Series contains temperature compensation. Features http://onsemi.com PLCC28 FN SUFFIX CASE 776 MARKING DIAGRAM* 1 MCxxxE116G AWLYYWW 500 ps Max. Propagation Delay VBB Supply Output Dedicated VCCO Pin for Each Receiver PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mod……
