器件名称:
MC100E196
功能描述:
PROGRAMMABLE DELAY CHIP
文件大小:
148.6KB 共7页
简 介:
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Programmable Delay Chip The MC10E/100E196 is a programmable delay chip (PDC) designed primarily for very accurate differential ECL input edge placement applications. The delay section consists of a chain of gates and a linear ramp delay adjust organized as shown in the logic symbol. The first two delay elements feature gates that have been modified to have delays 1.25 and 1.5 times the basic gate delay of approximately 80 ps. These two elements provide the E196 with a digitally-selectable resolution of approximately 20 ps. The required device delay is selected by the seven address inputs D[0:6], which are latched on chip by a high signal on the latch enable (LEN) control. The FTUNE input takes an analog voltage and applies it to an internal linear ramp for reducing the 20 ps resolution still further. The FTUNE input is what differentiates the E196 from the E195. An eighth latched input, D7, is provided for cascading multiple PDC’s for increased programmable range. The cascade logic allows full control of multiple PDC’s, at the expense of only a single added line to the data bus for each additional PDC, without the need for any external gating. MC10E196 MC100E196 PROGRAMMABLE DELAY CHIP 2.0ns Worst Case Delay Range ≈20ps/Delay Step Resolution Linear Input for Tighter Resolution >1.0GHz Bandwidth On Chip Cascade Circuitry Extended 100E VEE Range of –4.2 to –5.46V 75K Input Pulldown Resistors FN SUFFIX PLASTIC PACKAGE CASE 776-0……