器件名称:
TP3402
功能描述:
DASL Digital Adapter for Subscriber Loops
文件大小:
249.32KB 共16页
简 介:
TP3401 TP3402 TP3403 DASL Digital Adapter for Subscriber Loops December 1991 TP3401 TP3402 TP3403 DASL Digital Adapter for Subscriber Loops General Description The TP3401 TP3402 and TP3403 are complete monolithic transceivers for data transmission on twisted pair subscriber loops They are built on National’s double poly microCMOS process and require only a single a 5 Volt supply Alternate Mark Inversion (AMI) line coding in which binary ‘1’s are alternately transmitted as a positive pulse then a negative pulse is used to ensure low error rates in the presence of noise with lower emi radiation than other codes such as Biphase (Manchester) Full-duplex transmission at 144 kb s is achieved on a single twisted wire pair using a burst-mode technique (Time Compression Multiplexed) Thus the device operates as an ISDN ‘U’ Interface for short loop applications typically in a PBX environment providing transmission for 2 B channels and 1 D channel On 24 cable the range is at least 1 8 km (6k ft) System timing is based on a Master Slave configuration with the line card end being the Master which controls loop timing and synchronisation All timing sequences necessary for loop activation and de-activation are generated on-chip Selection of Master and Slave mode operation is programmed via the Microwire Control Interface A 2 048 MHz clock which may be synchronized to the system clock controls all transmission-related timing functions For the TP3401 this clock must be provided from an exter……
