器件名称:
ST485ERXDR
功能描述:
+5KV ESD PROTECTED, LOW POWER RS-485/RS-422 TRANSCEIVER
文件大小:
303.9KB 共13页
简 介:
ST485ER ±15KV ESD PROTECTED, LOW POWER RS-485/RS-422 TRANSCEIVER s s s s s s s s s s LOW QUIESCENT CURRENT: 300A DESIGNED FOR RS-485 INTERFACE APPLICATIONS -7V TO 12V COMMON MODE INPUT VOLTAGE RANGE DRIVER MAINTAINS HIGH IMPEDANCE IN 3-STATE OR WITH THE POWER OFF 70mV TYPICAL INPUT HYSTERESIS 30ns PROPAGATION DELAYS, 5ns SKEW OPERATE FROM A SINGLE 5V SUPPLY CURRENT LIMITING AND THERMAL SHUTDOWN FOR DRIVER OVERLOAD PROTECTION ESD PROTECTION: ±15KV (H.B.M.) ±8KV (IEC-1000-4-2 CONTACT DISCHARGE) ALLOWS UP TO 256 TRANSCEIVERS ON THE BUS DIP SOP DESCRIPTION The ST485E is al low power transceiver for RS-485 and RS-422 communication. Each driver output and receiver input is protected against ±15KV electrostatic discharge (H.B.M.) ±8KV (IEC-1000-4-2 contact discharge) shocks, without ORDERING CODES Type ST485ERCN ST485ERBN ST485ERXN ST485ERCD ST485ERBD ST485ERXD ST485ERCDR ST485ERBDR ST485ERXDR Temperature Range 0 to 70 °C -40 to 85 °C -55 to 150 °C 0 to 70 °C -40 to 85 °C -55 to 150 °C 0 to 70 °C -40 to 85 °C -55 to 150 °C Package latchup. These parts contain one driver and one receiver. This transceiver draws 300A (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The ST485E is designed for bi-directional data communications on m……
