器件名称:
LM5060
功能描述:
High-Side Protection Controller with Low Quiescent Current
文件大小:
523.03KB 共24页
简 介:
LM5060 High-Side Protection Controller with Low Quiescent Current September 22, 2010 LM5060 High-Side Protection Controller with Low Quiescent Current General Description The LM5060 high-side protection controller provides intelligent control of a high-side N-Channel MOSFET during normal on/off transitions and fault conditions. In-rush current is controlled by the nearly constant rise time of the output voltage. A power good output indicates when the output voltage reaches the input voltage and the MOSFET is fully on. Input UnderVoltage Lock-Out, with hysteresis, is provided as well as programmable input Over-Voltage Protection. An enable input provides remote On / Off control. The programmable Under-Voltage Lock-Out input can be used as second enable input for safety redundancy. A single capacitor programs the initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous Over-Current VDS fault detection delay time. When a detected fault condition persists longer than the allowed fault delay time, the MOSFET is latched off until either the Enable input or the Under-Voltage Lock-Out input is toggled low and then high. Features ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Available in Automotive grade / AEC Q-100 Wide operating input voltage range: +5.5V to +65V Less than 15 A quiescent current in disabled mode Controlled output rise time for safe connection of capacitive loads Charge pump gate driver for external N-Channel MOSFET Adjustable U……
