器件名称:
MCP2561/2
功能描述:
High-Speed CAN Transceiver
文件大小:
659.29KB 共30页
简 介:
MCP2561/2 High-Speed CAN Transceiver Features: Supports 1 Mb/s Operation Implements ISO-11898-5 Standard Physical Layer Requirements Very Low Standby Current (5 A, typical) VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes CAN Bus Pins are Disconnected when Device is Unpowered - An Unpowered Node or Brown-Out Event will Not Load the CAN Bus Detection of Ground Fault: - Permanent Dominant Detection on TXD - Permanent Dominant Detection on Bus Power-on Reset and Voltage Brown-Out Protection on VDD and VIO Pin Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage) Protection Against High-Voltage Transients in Automotive Environments Automatic Thermal Shutdown Protection Suitable for 12V and 24V Systems Meets or exceeds stringent automotive design requirements including “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.3, May 2012 High-Noise Immunity Due to Differential Bus Implementation High ESD Protection on CANH and CANL, Meets IEC61000-4-2 greater ±8 kV Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L Temperature ranges: - Extended (E): -40°C to +125°C - High (H): -40°C to +150°C Description: The MCP2561/2 is a Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the……
