器件名称:
DM74ALS646WM
功能描述:
Octal 3-STATE Bus Transceiver and Register
文件大小:
60.49KB 共6页
简 介:
DM74ALS646 Octal 3-STATE Bus Transceiver and Register October 1986 Revised June 2001 DM74ALS646 Octal 3-STATE Bus Transceiver and Register General Description This device incorporates an octal bus transceiver and an octal D-type register configured to enable multiplexed transmission of data from bus to bus or internal register to bus. This bus transceiver features totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic level drive provides this device with the capability of being connected directly to and driving the bus lines in a bus-organized system without the need for interface or pull-up components. They are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The registers in the DM74ALS646 are edge-triggered Dtype flip-flops. On the positive transition of the clock (CAB or CBA), the input bus data is stored into the appropriate register. The CAB input controls the transfer of data into the A register and the CBA input controls the B register. The SAB and SBA control pins are provided to select whether real-time data or stored data is transferred. A LOW input level selects real-time data, and a HIGH level selects stored data. The select controls have a “make before break” configuration to eliminate a glitch which would normally occur in a typical multiplexer during the transition between store a……