器件名称:
M74HC374
功能描述:
OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING
文件大小:
241.63KB 共11页
简 介:
M74HC374 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING s s s s s s s HIGH SPEED: fMAX = 90MHz (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC = 4A(MAX.) at TA=25°C HIGH NOISE IMMUNITY: VNIH = V NIL = 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 6mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 374 DIP SOP TSSOP ORDER CODES PACKAGE DIP SOP TSSOP TUBE M74HC374B1R M74HC374M1R T&R M74HC374RM13TR M74HC374TTR DESCRIPTION The M74HC374 is an high speed CMOS OCTAL D-TYPE FLIP FLOP WITH 3-STATE OUTPUTS NON INVERTING fabricated with sub-micron silicon gate C2MOS technology. This 8 bit D-TYPE FLIP FLOP is controlled by a clock input (CK) and an output enable input (OE). On the positive transition of the clock, the Q outputs will be set to the logic state that were setup at the D inputs. While the OE input is at low level, the eight outputs will be in a normal logic state (high or low logic level) and while OE is high the outputs will be in a high impedance state. The output control does not affect the internal operation of flip-flops; that is, the old data can be retained or the new data can be entered even while the outputs are off. All inputs are equipped with protection circuits against static discharge and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS July 2001 1/11 M74HC374 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No ……