器件名称:
M74HC574M1R
功能描述:
OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING
文件大小:
238.94KB 共11页
简 介:
M74HC574 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING s s s s s s s HIGH SPEED: fMAX = 90MHz (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC = 4A(MAX.) at TA=25°C HIGH NOISE IMMUNITY: VNIH = V NIL = 28 % VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 6mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 574 DIP SOP TSSOP ORDER CODES PACKAGE DIP SOP TSSOP TUBE M74HC574B1R M74HC574M1R T&R M74HC574RM13TR M74HC574TTR DESCRIPTION The M74HC574 is an high speed CMOS OCTAL D-TYPE FLIP FLOP WITH 3-STATE OUTPUTS INVERTING fabricated with sub-micron silicon gate C2MOS technology. This 8 bit D-TYPE FLIP FLOP is controlled by a clock input (CK) and an output enable input (OE). On the positive transition of the clock, the Q outputs will be set to the logic state that were setup at the D inputs. While the OE input is at low level, the eight outputs will be in a normal logic state (high or low logic level) and while OE is in high level the outputs will be in a high impedance state. The output control does not affect the internal operation of flip-flops; that is, the old data can be retained or the new data can be entered even while the outputs are off. All inputs are equipped with protection circuits against static discharge and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS July 2001 1/11 M74HC574 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PI……