器件名称:
TC520ACPD
功能描述:
SERIAL INTERFACE ADAPTER FOR TC500 A/D CONVERTER FAMILY
文件大小:
81.41KB 共8页
简 介:
EVALUATION KIT AVAILABLE 1 TC520A SERIAL INTERFACE ADAPTER FOR TC500 A/D CONVERTER FAMILY FEATURES s s s s s s Converts TC500/500A/510/514 to Serial Operation Programmable Conversion Rate and Resolution for Maximum Flexibility Supports up to 17 Bits of Accuracy Plus Polarity Bit Low Power Operation: Typically 7.5mW 14-Pin DIP or 16-Pin SOIC Packages Polled or Interrupt Mode Operation GENERAL DESCRIPTION The TC520A Serial Interface Adapter provides logic control for TelCom's TC500/500A/510/514 family of dual slope, integrating A/D converters. It directly manages TC500 converter phase control signals A, B, and CMPTR thereby reducing host processor task loading and software complexity. Communication with the TC520A is accomplished over a 3 wire serial port. Key converter operating parameters are programmable for complete user flexibility. Data conversion initiated when the CE input is brought low. The converted data (plus overrange and polarity bits) are held in an 18 bit shift register until read by the processor, or until the next conversion is completed. Data may be clocked out of the TC520A at any time, and at any rate the user prefers. A Data Valid (DV) output is driven active at the start of each conversion cycle indicating the 18 bit shift register update has just been completed. This signal may be polled by the processor, or can be used as data ready interrupt. The TC520A timebase can be derived from an external frequency source of up to 6MHz; or can operate from its ……