51单片机方波发生器程序100HZ和200HZ按键控制

#include
#define uchar unsigned char
#define uint unsigned int
sbit output=P1^7; //输出点
sbit oneset=P3^2; //设置100HZ
sbit twoset=P3^3; //设置200HZ
uint number1=0; //定时器0高8位
uint number2=0; //定时器0低8位

void main()
{

TMOD=0x01;
TH0=0xee;//任意设定初值
TL0=0x0b;
EA=1;
ET0=1;
TR0=1;
while(1)
{
if(oneset==0)//键值判断 oneset为100HZ 实际是100.027HZ略有误差
{number1=0xee;
number2=0x0b;
}
if(twoset==0) //键值判断twoset为200HZ 实际是200.143HZ略有误差
{
number1=0xf7;
number2=0x0b;
}

}
}

void init()interrupt1
{
TH0=number1;
TL0=number2;
output=~output;
TR0=1;
}