AT91SAM9263
HFP: Horizontal Front Porch
Number of idle LCDDOTCK cycles at the end of the line. Idle period is(HFP+1)LCDDOTCK cycles Bit21..31
AT91SAM9261- 6260G
HFP: Horizontal Front Porch
Number of idle LCDDOTCK cycles at the end of the line. Idle period is(HFP+1)LCDDOTCK cycles Bit21..31
AT91SAM9261- 6260K
HFP: Horizontal Front Porch
Number of idle LCDDOTCK cycles at the end of the line. Idle period is(HFP+2)LCDDOTCK cycles Bit21..31
AT91SAM9RL64
HFP: Horizontal Front Porch
Number of idle LCDDOTCK cycles at the end of the line. Idle period is (HFP+1) LCDDOTCK cycles. Bit21..31
IAR EWARM
ioat91sam9261.ddf
ioat91sam9261s.ddf
ioat91sam9263.ddf
ioat91sam9rl64.ddf
sfr = "LCDC_TIM2.HFP", "Memory", 0x0060080c, 4, base="16",bitRange="22-31"
正确的是 bitRange="21-31"
at91lib V1.5
//------------------------------------------------------------------------------
/// Sets the horizontal timings of the LCD controller. Meaningful for both
/// STN and TFT displays.
/// \param hbp Number of idle LCDDOTCLK cycles at the beginning of a line.
/// \param hpw Width of the LCDHSYNC pulse, in LCDDOTCLK cycles.
/// \param hfp Number of idel LCDDOTCLK cycles at the end of a line.
//------------------------------------------------------------------------------
void LCD_SetHorizontalTimings(
unsigned int hbp,
unsigned int hpw,
unsigned int hfp)
{
ASSERT(((hbp-1) & 0xFFFFFF00) == 0,
"LCD_SetHorizontalTimings: Wrong hbp value.\n\r");
ASSERT(((hpw-1) & 0xFFFFFFC0) == 0,
"LCD_SetHorizontalTimings: Wrong hpw value.\n\r");
ASSERT(((hfp-1) & 0xFFFFFF00) == 0,
"LCD_SetHorizontalTimings: Wrong hfp value.\n\r");
AT91C_BASE_LCDC->LCDC_TIM2 = (hbp-1) | ((hpw-1) << 8) |((hfp-1) << 24);
正确的是|((hfp-2) << 21);
}是否hfp占用了b24..b31 ? 或者应该是((hfp-1) << 21); 或者 ((hfp-2) << 21)
从这些资料可以看出正确的是((hfp-2) << 21)
1. 修改 at91lib
2. 修改 IAR DDF 文件