共3条 1/1
1
跳转至
页
转发邮件,w4nghui@hotmail.com
你好: 在论坛上知道您是vxwork的高手,我自己做了一块snds100的开发板,想在上面运行vxwork,现在能通过网络bootload,但是在配置TGTSVR 时,与目标板连接 出现以下问题 TGTSVR (wh@sever): Sat Nov 23 22:36:46 2002 Wind River Systems Target Server: NT/Win95 version Connecting to target agent... succeeded. Attaching C++ interface... succeeded. Attaching coff OMF reader for ARM CPU family... succeeded. Warning: Target checksum: 0x2703 (computed from 0x1000 to 0x8644c). Host checksum: 0xd703 (computed from 0x69a420 to 0x71f86c). Warning: Core file checksums do not match. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol ..stabstr from section of type STYP_REG. Ignored. Warning: Symbol ..stabstr from section of type STYP_REG. Ignored. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol .stabstr from section of type STYP_REG. Ignored. Warning: Symbol ..stabstr from section of type STYP_REG. Ignored. 您知道是何造成的么?如何解决? 我做的开发板唯一与snds100不同的是sdram我用的是hy的pc133的片子。
关键词: 转发 邮件 w4nghui@hotmail.com
snds100的BSP写得并不是很好,尤其是网络驱动。checksum的问题总也存在,但到现在我还没有发现它有会造成什么重大的问题,据说是在汇编部分没有对齐造成的。 出现“Warning: Symbol .stabstr from section of type STYP_REG. Ignored.”的警告,我想你是用bootable生成的映象吧,是有这个问题,主要是由于符号表造成的,如果用"build"->"Standard BSP Builds"->"vxworks"则不会出现这样的问题。实际上这个问题也不会对你的调试有所影响。
共3条 1/1
1
跳转至
页
回复
有奖活动 | |
---|---|
请大声喊出:我要开发板! | |
【有奖活动】EEPW网站征稿正在进行时,欢迎踊跃投稿啦 | |
【有奖活动】智能可穿戴设备AR/VR如何引领科技新潮流! | |
奖!发布技术笔记,技术评测贴换取您心仪的礼品 | |
【有奖活动】震撼来袭!这场直播将直击工程师的心灵! |